• DE
  • DE
    • +49 (0) 2402 766810 info@dyna-mess.de

    Torsion test rig

    Torsion testing machines
    Technical properties

    Torsion test rig

    Various components, including vehicle couplings, elastomer couplings, dual-mass flywheels, drive shafts and transmission components, are subjected to torsional loads during operation. These components can be tested on DYNA-MESS torsion test rigs with axial/radial misalignment.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS circumferential torsion testing machine

    Technical properties

    DYNA-MESS torsion testing machine 14 kNm

    Static characteristic curves and dynamic characteristic values

    DYNA-MESS torsion test rigs enable both static load tests up to breakage and dynamic fatigue tests to determine service life. Vibrations can be superimposed on static moments in order to simulate operating conditions. The test benches are also used to determine characteristic values, including the static torsion curve, hysteresis, stiffness at various operating points, dynamic stiffness, loss angle and damping energy.

    DYNA-MESS torsion testing machine

    Axial preloads, torsion test rigs and superposition test rigs

    Complex test systems for development can be equipped with several superimposed drives if required by the application of the component to be tested. For example, systems with selectable, constant drive speed, to which a vibration load and additional slip between the input and output side is superimposed, have been realised. Classic torsion test benches or torsion test benches with superimposed axial loading are also possible.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC