• DE
  • DE
    • +49 (0) 2402 766810 info@dyna-mess.de

    DYNA-EndoWear

    DYNA-EndoWear
    Technical properties

    DYNA-EndoWear:
    Universal wear simulator
    for joint implants

    In close co-operation with universities, users and clinics, DYNA-MESS has developed the purely electrically driven wear simulator DYNA-EndoWear. A special feature of this machine is the ability to test both hip and knee implants in accordance with the DIN EN ISO 14242-1 (hip) and 14243-3 & 14243-1 (knee) standards, as well as shoulder and ankle endoprostheses.

    We are DYNA-MESS. Test Systems.

    Technical properties

    The servo-electric axes are installed in a compact machine that requires only a small footprint. Neither compressed air nor hydraulic oil is required for operation.

    In addition to the three test stations, DYNA-EndoWear has a reference station for load-equivalent conditioning without the influence of wear.

    Another special feature is the synchronised, independent control of the individual test stations using the DYNA-CLC high-performance controller. The proven DYNA-TCC software can be used to quickly and easily parameterise the tests in accordance with the above-mentioned standards.

    Data sheet

    One multi-component transducer measures forces and torques in all six degrees of freedom at each test station. Dynamic loads of Fx=300 N, FZ=3000 N and MZ=10 Nm are possible.

    DYNA-EndoWear is available in three different versions:

    • DYNA EndoWear 3H for tests on hip implants
    • DYNA EndoWear 3K for tests on knee implants
    • DYNA EndoWear 3HK for tests on hip and knee implants

    The implants can also be tested in media (e.g. saline solution) at the individual test stations. Each station is equipped with a leakage sensor and the temperature is set and monitored.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC