• DE
  • DE
    • +49 (0) 2402 766810 info@dyna-mess.de

    DYNA-ElastoTest

    DYNA-ElastoTest
    Technical properties

    DYNA-ElastoTest

    Compact end-of-line test station for the production-related assessment of static and dynamic characteristic values of rubber/metal elements. The DYNA-ElastoTest is a plug and play-capable test station with integrated controller.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS DYNA-ElastoTest End-of-Line testing system

    Technical properties

    DYNA-MESS DYNA-ElastoTest End-of-Line testing system for electrics and electronics

    Automatic mode

    • Provision of standard interface signals to the higher-level control system
    • Automatic test specimen detection
    • Automatic sample selection
    • Automatic test start
    • Automatic data storage
    • Shift and article file

    “Elastomer test” software module

    • Test specimen conditioning
    • Static tests
    • dynamic tests
    • Sweep tests/characterisation
    • Graphical representation of signal curves and hysteresis curves
    • Automatic determination of component parameters (static stiffness, dynamic stiffness, loss angle, work loss, damping and others according to different evaluation methods)
    • Online display of the component characteristics and the iO/niO evaluation

    Software module “Sweep test”

    • Component characterisation using different evaluation methods
    • Sweep tests in force/displacement control
    • Display of dynamic characteristic values over frequency
    DYNA-MESS ElastoTest End-of-Line test system Test lamp Drop shaft
    DYNA-MESS DYNA-ElastoTest End-of-Line test system with label printer and scanner

    Options

    • Vacuum test
    • Temperature-dependent OK/nOK evaluation
    • DMC printer
    • DMC scanner
    • Laser labelling
    • Needle embosser
    • Further customised solutions can be implemented

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    Vertical testing machines

    Vertical testing machines
    Technical properties
    Tension Torsion

    Vertical testing machines


    We offer vertical testing machines with servo-hydraulic, servo-pneumatic and servo-electric test cylinders. With 2-column or 4-column test frames, they enable tests with top or bottom-mounted test cylinders for versatile tests.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS vertical testing machine with PC cabinet

    Technical properties

    DYNA-MESS vertical testing machine with workstation and protective housing

    Test frame

    The machine frames are designed as a 2- or 4-column construction and are characterised by maximum machine rigidity. They are therefore ideally suited for static and, in particular, dynamic tests.

    Drive types

    The most suitable drive types are used depending on the individual testing requirements of our customers. In addition to the desired nominal force and the required dynamics, aspects such as component behaviour and ambient conditions also determine the selection of the right drive.


    Performance capability

    With servo-pneumatic, servo-electric or servo-hydraulic drive concepts, we cover a wide range of requirements. The nominal forces range from 10 kN to several meganewtons.

    In addition to the machines for purely static testing, variants for low cycle fatigue tests (LCF) for test frequencies up to 10 Hz and for high cycle fatigue tests (HCF) for test frequencies up to 100 Hz are available.

    DYNA-MESS vertical testing machine High Cycle Fatigue

    A special version for high-frequency tests is the V2H 10 HCF+ version, which enables tests with frequencies of up to 500 Hz.

    DYNA-MESS vertical testing machine with temperature chamber

    Sensors

    DYNA-MESS testing machines are equipped with high-precision force and displacement measurement as standard.

    Additional measuring systems can be easily integrated.

    Data sheet

    Tension Torsion version

    Tension Torsion describes a combined test specimen load from a linear drive and torsion unit.
    Two different configurations are possible:

    • Biaxial test specimen load from one side
    • Biaxial test specimen load from different sides (one axis in the crosshead and one axis in the machine base)

    Electric, pneumatic and hydraulic versions are available.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    Table top testing machines

    Table top testing machines
    Technical properties

    Table top testing machines


    Characterised by their flexibility and user friendliness, our table top testing machines enable tensile, compression and bending tests to be performed on a wide range of materials, components and parts. Robust construction and innovative technology ensure accurate and consistent results for testing in a variety of industries.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS table-top testing machine with electronics and PC

    Technical properties

    DYNA-MESS table-top testing machines

    Test frame

    The test frames, designed as a 2- or 4-column construction depending on the nominal force, are characterised by maximum machine rigidity and are therefore ideally suited for static and, in particular, dynamic tests.

    Drive types

    The most suitable drive types are used depending on the individual testing requirements of our customers. In addition to the desired nominal force and the required dynamics, aspects such as component behaviour and ambient conditions also determine the selection of the right drive.

    DYNA-MESS table-top testing machines comparison servo-pneumatic and servo-electric


    Performance

    With servo-pneumatic, servo-electric or servo-hydraulic drive concepts, we cover a wide range of requirements. The nominal forces range from 1 kN to 50 kN, the test frequencies are a maximum of 100 Hz.


    Sensors

    DYNA-MESS testing machines are equipped with high-precision force and displacement measurement as standard. Additional measuring systems can be easily integrated.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    End-of-line test systems

    End-of-line test systems
    Technical properties

    End-of-line test systems

    Production-integrated testing systems for automated 100% testing and OK/nOK evaluation of components in the production process.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS end-of-line testing system DYNA-ElastoTest

    Technical properties

    DYNA-MESS end-of-line testing system Test specimen holder
    • Determination of characteristic values
    • OK/nOK evaluation
    • Semi-automatic or fully automatic operation
    • Communication with higher-level control system, e.g. via TCP/IP
    • Automatic part recognition and selection of test programmes
    • Daily file, shift file, etc.
    Data sheet

    Options

    • DMC printer
    • DMC scanner
    • Laser labelling
    • Needle embosser
    • Further customised solutions can be implemented
    DYNA-MESS end-of-line testing system Robot assembly
    DYNA-MESS end-of-line testing system DYNA-ElastoTest electrics and electronics

    Example: DYNA-ElastoTest

    Compact end-of-line test station for the production-related evaluation of static and dynamic characteristic values of rubber/metal elements. The DYNA-ElastoTest is a plug and play-capable test station with integrated controller.

    DYNA-ElastoTest

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    Custom testing machines

    Custom testing machines
    Realisation
    Executed examples

    Custom testing machines

    In addition to standard testing machines, DYNA-MESS Prüfsysteme GmbH primarily offers the development and realisation of special testing equipment.

    We are DYNA-MESS. Test Systems.

    Customised test systems Strip train system

    Realisation

    Special testing tasks can often only be performed using specialised testing systems. And that is what DYNA-MESS focuses on! From concept development to engineering and manufacturing to commissioning and handover ready for operation, special solutions are found and implemented.

    The special developments cover both the mechanical engineering design of the test systems and to special software solutions. Thanks to in-house software development, DYNA-MESS can fulfil customer requirements flexibly, quickly and cost-effectively.

    Executed examples

    Manhole covers for traffic areas

    • Special machine for pressure tests
    • Base with integrated hydraulic unit
    • Automatically operated sliding table
    • Special software for tests in accordance with EN 124-1

    Strip draw test machine

    • Tribological tests
    • Friction coefficient determination on oiled sheet metal strips
    • Force measuring elements for measuring frictional forces
    • Heated tools
    • Semi-automated handling of test specimens

    Hydraulic axle pivot bearings for rail vehicles

    • Static and dynamic determination of characteristic values on elastomer components
    • Semi-automated component feeding and handling
    • End-of-line testing

    Testing of pantographs

    • Laser displacement measurement
    • Function test and qualification
    • Lift/lower time measurement
    • “Free fall” measurement

    DYNA-TDT: Trailer Drawbar Tester

    • Testing of drawbars (ECE R55 directive)
    • Two-axes tests in phase control
    • Dynamic and static load

    Dynamic tests on steel samples

    • Forces up to 5 MN
    • Frequency up to 10 Hz
    • Threshold load testing of threaded steels
    • 350 kW hydraulic supply

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC