DYNA-EndoWear 3HK

Universal Implant Wear Simulation type 3K

DYNA-MESS has developed the DYNA-EndoWear- series in close cooperation with universities, renowned users and clinics. Only one machine is required to test hip and knee joint types according to DIN EN ISO 14242-1 (hip) and 14243-3 & 14243-1 (knee).

The machine is electrically powered and does not require compressed air or hydraulic oil. Thanks to our compact design, DYNA-EndoWear requires comparatively little space in the laboratory.

In addition to the three test stations DYNA-EndoWear always contains a reference station for loaded conditioning without wear influence.

All axes are controlled in closed-loop synchronously by our new high-performance multi-channel controller DYNA-CLC. Together with our established Software DYNA-TCC tests according to the norms mentioned above can easily be parametrised and executed.

A six axis load cell measures force and torque at each test station. Dynamic loads up to F_x=300 N, F_Z=3000 N und M_Z=10 Nm are possible.

DYNA-EndoWear is currently available in three different configurations:

• DYNA-EndoWear 3H for Hip only
• DYNA-EndoWear 3K for Knee only
• DYNA-EndoWear 3HK for Hip and Knee

For tests in medium (e.g. saline), each test station is equipped with a leak detection and can be temperature controlled.

  Datasheet DYNA-EndoWear